【Tips】
One: conflict with the system settings, win2000, win7, xp and other new systems directly support mobile removable hard disk, while the old system below win98 to be recognized by installing the driver.
Two: poor contact with the USB interface. usb interface is not open, insufficient power supply, the interface is loose can choose to plug another USB interface. In addition, the general old computer old system is not supported, you can choose to download usb patch to solve the problem.
Three. The hard drive itself quality problems, vibration and irregular operation can damage the hard drive. To strictly follow the standard operation, the hard disk does not read the disk, you can not directly pull it out, you should click on the taskbar "unplug or eject hardware", and only after the system allows you to pull out from the host. Only the correct standard use can better maintain and extend the life of the Western Digital.
If the above operations do not solve the problem, it may be hard drive failure, head failure, voice coil, drive arm and other reasons. Such problems have to hard disk open detection, hard disk within the important data recovery and other steps are to be recovered through professional data recovery companies.
wd hard drive computer can not be recognized cause one: USB interface problems
USB interface is not turned on: in some old machines (including some brand-name machines) although there is an external USB interface, but in the BIOS is the default off, so even if the system support is not possible, so you should check the BIOS settings in the USB interface option is turned on: hold down the Del key when starting the computer, enter the BIOS settings, in " Chipset
Features Setup" or "Integrated Peripherals" will be "OnChip
USB" set to "Enabled", save and restart the computer.
WD Elements USB3.0 1TB External hard drive not recognized in computer
The system does not support the USB interface: This situation also occurs mainly in some old computers. Such as a compatible machine, the motherboard is the flagship VISTA710V2, the motherboard chipset with VIA
Apollo MVP3, external USB interface card after the system does not recognize (installed Windows Me and Windows 2000 dual system), in the "USB interface".
2000 dual system), in the "Device Manager" can not find the "Universal Serial Bus Controller". A check on the Internet, it turns out that the motherboard chipset has problems, rushed to download the latest motherboard BIOS from the Internet to refresh, and download the USB driver patch provided by VIA specifically for the chipset, finally recognized on my computer "mobile storage devices.
USB interface power supply is insufficient: the majority of mobile hard disk normal work required 5V voltage, 0.5A current can be supplied directly through the motherboard's USB interface, but some motherboard USB interface power supply does not reach this value, resulting in mobile hard disk can not be recognized by the system. The good thing is that most of the special USB connection cable of the mobile hard disk box is divided into a PS/2 connector, as long as the connector is plugged into the PS/2 interface on the motherboard.
WD Elements USB3.0 External hard drive not recognized in computer, can not be recognized for two reasons: personal improper operation causes mobile hard disk can not read
Before plugging in the mobile hard drive it is best to close the various applications that are running, and do not plug in the system startup process.
Mobile hard disk just connected to a system to recognize the disk, read the disk process, before the end of this process is best not to carry out any operation (it is recommended to mobile hard disk less partitioned, the more partitioned, the longer the system to recognize the disk), to wait until the mobile hard disk work indicator stabilized before starting to operate.
The use of mobile hard disk will also appear before can be used, once in a while and can not use the situation, this situation can be first "system devices" in the "unknown USB device" delete, and then unplug the mobile hard disk, and then reboot the system, and then the mobile hard disk Connect, the failure can generally be solved.
WD Elements External hard drive not recognized (Data Recovery with 3 steps)
Step 1 : Free download and Open it
Preview search and find more accurate recovery. Scan data quickly with one click,
After scanning, you can preview and search to find data, which is super fast, such as documents and pictures
Free download Bplan data recovery Software and then install it, and then click the button "Deep Scan"
Many customers have completely retrieved photos videos or PPT pictures, data sheets, and office documents in this mode, and received a lot of praise from customers. It takes a long time, but it is still the fastest in the industry.
Step 2 : Deep Scan WD Elements External hard drive not recognized file
Deep scan is a direct data recovery from the bottom layer of hard disk, USB drive, SD card and other devices bypassing the file system, so you can retrieve more complete data using deep recovery. At the same time we have to figure out the difference between a physical hard drive and a logical hard drive. A physical hard drive is a hardware entity, if you have only one hard drive on your computer, then he has only one physical hard drive; a logical hard drive is one that is artificially partitioned physically for easy access and management of the files inside. We use software to recover data preferably to the physical hard disk, so that the recovered data is more complete.
Step 3 : Save lost Photo video files from not recognized WD Elements External hard drive
Preview search and find more accurate recovery. Scan data quickly with one click,
After scanning, you can preview and search to find data, which is super fast, such as documents and pictures
Bplan data recovery with 3 steps
Step 1 : Free download and Open it
Step 2 : Deep Scan lost files
Step 3 : Recover lost files
